Urethane coated steel plates provide smooth and quiet performance.
The open draft of the interior surface maximizes the range of motion and increases ergonomics with the contoured rubber grip.
The 'Auto-Lock' lever on the handle is a simple way to make micro adjustments in 2.5 lbs. increments by removing two chrome ballast weights within the lower tubes. To remove the inner weights tilt the handle back so the weights don't spill out, then pull the lever down. Carefully remove the inner weights and put them in the storage slots on the stand. Then drop the handle back in the weight stack to close the lever, or do it manually. To add the weights back into the handle reverse the process.
The color bands on the rails correspond with the weight chart on the handle to show what will be selected.
This is how the magic happens! Adjust weights quickly to keep workouts flowing by using the pin to select different rails. For example, moving the pin to the bottom selects all the weight plates. The pin is super strong polypropylene and rated for a 500lbs. max load. Magnets inside the pin hold it securely once inserted completely.
Our detailed policies are available below. If you have any questions or concerns please contact us.
All stages are sold in pairs. Stage 1 is required to use the Stage 2 and Stage 3 kits.
Replaces 16 pairs of dumbbells / 825 lbs. of weights
Expandable to 70 or 90 lbs. per hand
For home use only
Increments achieved: 2.5, 5, 7.5, 10,15, 17.5, 20 25, 27.5, 30, 35, 37.5, 40, 45, 47.5, 50 lbs per hand
Dimensions: 12" L x 6.5" W x 6.5" H (30.48 x 16.51 x 16.51 cm)
Features
Weight Stacks: Welded solid steel construction. Urethane-coated plates provide smooth and quiet performance.
Handles: An open design of the handle allows for an increased range of motion. Comfortable contoured rubber grip.
Side Rails: Bands on the side rails show the weight of the dumbbell selected with the pin. The pin covers the band/rail that's been selected to easily show what the weight is.
Auto-Lock: EXP models have an 'Auto-Lock' to make micro-adjustments by reducing the handle weight by 2.5 or 5 lbs. The two 2.5 lbs. inside the tubes at the base of the handle can be removed by pulling on the lever. Tilt the handle back so the inner weights don't spill out, then gradually tip the handle forward to remove the weights. Manually close the lever or insert the handle in the weight stack to close automatically.
Selector Pin: Simple and efficient. Insert the magnetic polypropylene pin into the slot to select the desired weight. The pin has a 500 lbs. max load.
Our detailed policies are available below. If you have any questions or concerns please contact us.
The PowerBlock Compact Stand is the ideal solution for easy weight selection and storage. This highly efficient stand does what it needs to do and can then be folded flat to store in a closet or under a bed.
Specifications:
Large Compact Stand
Dimensions: 20" W x 18" D x 26" H (50.8 x 45.72 x 66.04 cm)
Works with expandable PowerBlock sets up to 90 lbs.
Features Adder weight ports
No Assembly Required
Small Compact Stand
Dimensions: 20" W x 18" D x 24" H (50.8 x 45.72 x 60.96 cm)
Works with non-expandable PowerBlock sets up to 50 lbs.
No Assembly Required
Our detailed policies are available below. If you have any questions or concerns please contact us.
Versatile and compact, the PowerBlock Sport Bench is the bestselling bench that allows you to maximize the use of your dumbbells with many more exercises. With 5 positions and an adjustable seat, you are locked in for a military press and perfectly flat for a bench press. This bench is also stable enough to be used for step-ups! The tripod base design is stable, but also minimal so nothing gets in the way of your feet placement. The optional attachments expand the bench functions to add Chin-up and or Dip exercises.
Features
5 position adjustable bench with adjustable seat
Bench Positions: Flat to 30, 45, 60 degrees and also military position
14 Gauged 2" x 3" powder-coated steel tubing
Contoured pad
Built-in wheels and handle kit for easy storage
Dimensions : Flat Position ( from pad to floor) 16" / Total Length (flat position) - 50" / Widest Part (back leg) 21"
Weight Capacity: 500 lbs. (226.8 kg)
Our detailed policies are available below. If you have any questions or concerns please contact us.
Turning a set of dumbbells into a set of Kettlebells has never been easier, just drop the 10 pound handle with a 25mm grip diameter into any compatible weight stack and begin. Adding another dimension to different movements gets the most out of every workout. This is an excellent tool for kettlebell swings, farmers walks, lunges, and more.
Product Features
Sold as a single unit (1 handle)
25mm grip diameter
Handle weighs 10 lbs
Does not contain adder weight ports
Dimensions: 23.5" × 2.5" × 2.5"
Compatible Models
Pro 50 (Pro Series)
Pro EXP (Pro Series)
Pro 50 and Pro 90 (Pro Commercial Series)
U50, U70, U90 (Urethane Series)
Our detailed policies are available below. If you have any questions or concerns please contact us.
The PowerBlock Pro 50 Adjustable Dumbbell set has a weight range of 5-50lbs per hand, gives every 2.5 lb increment, and replaces 20 pairs of dumbbells in the space of 1 pair. These weights are extremely easy to use, with selector pins that let you change weights easily, similar to gym exercise machines. Replaces 20 pairs of dumbbells, the equivalent of 1049 lbs of free weights. It's a great space saver; more compact and balanced than traditional dumbbells.
Features
Weight Stacks: Urethane-coated steel plates provide smooth and quiet performance.
Handle:The open draft of the interior surface maximizes the range of motion and increases ergonomics with the contoured rubber grip.
Auto-Lock: The 'Auto-Lock' lever on the handle is a simple way to make micro-adjustments in 2.5 lbs. increments by removing two chrome ballast weights within the lower tubes. To remove the inner weights tilt the handle back so the weights don't spill out, then pull the lever down. Carefully remove the inner weights and put them in the storage slots on the stand. Then drop the handle back in the weight stack to close the lever, or do it manually. To add the weights back into the handle reverse the process.
Side Rails:The colour bands on the rails correspond with the weight chart on the handle to show what will be selected.
Selector Pin: This is how the magic happens! Adjust weights quickly to keep workouts flowing by using the pin to select different rails. For example, moving the pin to the bottom selects all the weight plates. The pin is super strong polypropylene and rated for a 500lbs. max load. Magnets inside the pin hold it securely once inserted completely.
Don't sacrifice your weight when you're on the road when you use the PowerBlock Travel Bench. The folding weight bench boasts a built-in handle and folds to only eight inches tall. It holds up to 550 lbs. The sturdy design makes this a reliable and versatile piece of equipment, while a durable powder-coated finish and vinyl top resist wear. This fold-up bench allows for easy travel or storage.
Fold-out the legs and perform a wide variety of workout bench or jump box exercises. When finished, it's easy to slide it under a bed or place it in a closet.
Features
Fold up bench allows for easy storage
A built-in handle that allows the bench to be easily carried
14-gauged 2" x 3" steel tubing
Folding Height: 8" (20.32 cm)
Dimensions: 40" L x 9.5" W x 15" H (101.6 x 24.13 x 38.1 cm)
Our detailed policies are available below. If you have any questions or concerns please contact us.
Aesthetic consistency in the ultimate home gym means going with this Rack Stand. Its robust design and wide stance makes lifting heavy weights off the stand easier. The center channel provides perfect storage for the adder weights in any 90 pound EXP dumbbell set. Compatible with all home dumbbells.
Product Features:
Dimensions 19″L x 21″W x 29″H
Steel Construction
Powder Coat Finsih
Adhesive Tray Mats provided to reduce wear on dumbbells and stand when racking
Ships in 1 Carton
Assembly Required
Our detailed policies are available below. If you have any questions or concerns please contact us.
The PowerBlock Sport 24 Adjustable Dumbbells replace 8 pairs of dumbbells. These weights are extremely easy to use, with selector pins that let you change weights easily, similar to gym exercise machines. Weights range from 3-24 lbs. (1.36 - 10.8 kg) in 3 lbs increments. The handles have a padded handle for wrist protection. It's a great space saver; more compact and balanced than traditional dumbbells.
Specifications
Increments: 3, 6, 9, 12, 15, 18, 21, 24 lbs. per hand
Dimensions: 10" L x 5.5" W x 5.5" H (25.4 x 13.97 x 13.97 cm)
Our detailed policies are available below. If you have any questions or concerns please contact us.
Blast your delts, shoulders, and triceps with this SportBench Dip Attachment. The product securely attaches to the back frame of the bench for quick and effective home gym Dip Station. Add some versatility to your bench and home gym with the Dip Station Attachment.
The PowerBlock Pro 32 Adjustable Dumbbell set has a weight range of 4-32lbs per hand, gives every 4 lb increment, and replaces 8 pairs of dumbbells in the space of 1 pair. These weights are extremely easy to use, with selector pins that let you change weights easily, similar to gym exercise machines. It's a great space saver; more compact and balanced than traditional dumbbells.
Features
Weight Stacks: Urethane-coated steel plates provide smooth and quiet performance.
Handle:The open draft of the interior surface maximizes the range of motion and increases ergonomics with the contoured rubber grip.
Auto-Lock: The 'Auto-Lock' lever on the handle is a simple way to make micro-adjustments in 2.5 lbs. increments by removing two chrome ballast weights within the lower tubes. To remove the inner weights tilt the handle back so the weights don't spill out, then pull the lever down. Carefully remove the inner weights and put them in the storage slots on the stand. Then drop the handle back in the weight stack to close the lever, or do it manually. To add the weights back into the handle reverse the process.
Side Rails:The colour bands on the rails correspond with the weight chart on the handle to show what will be selected.
Selector Pin: This is how the magic happens! Adjust weights quickly to keep workouts flowing by using the pin to select different rails. For example, moving the pin to the bottom selects all the weight plates. The pin is super strong polypropylene and rated for a 500lbs. max load. Magnets inside the pin hold it securely once inserted completely.
Specifications
Weight Increments: 4 lbs, 8 lbs, 12 lbs, 16 lbs, 20 lbs, 24 lbs, 28lbs, and 32 lbs per hand
Dimensions (LxWxH): 12″ x 5.75″ x 5.5″
* Non-Epandable*
Our detailed policies are available below. If you have any questions or concerns please contact us.
Weight Stacks: Welded solid steel construction. Urethane-coated plates provide smooth and quiet performance.
Handles: An open design of the handle allows for an increased range of motion. Comfortable contoured rubber grip.
Side Rails: Bands on the side rails show the weight of the dumbbell selected with the pin. The pin covers the band/rail that's been selected to easily show what the weight is.
Selector Pin: Simple and efficient. Insert the magnetic polypropylene pin into the slot to select the desired weight. The pin has a 500 lbs. max load.
Our detailed policies are available below. If you have any questions or concerns please contact us.
Transform your SportBench into a Pull-up/Chin-up station to strengthen those lats and biceps. This attachment is quick to install and quick to remove with a simple turn of a knob. Add some versatility to your bench and your home gym with this product.